Everything you need to start your finish woodworking, from the air compressor to the nailers, fasteners, air hose and fittings. NAILERS: Brad Nailer uses 18 gauge, 5/8″ to 1 1/4″ brad nails. Finish Nailer uses 16 gauge, 3/4″ to 2 1/2″ finish nails. Features include adjustable depth-of-drive, jam release mechanism, non-marring nose tip, hardened driver blade and muffled, adjustable exhaust port. The .8 (Running) HP 6 Gallon Pancake Compressor: 10 Amp, 120 VAC motor, 150 PSI...
1-1/2″ Stapler Kit, Uses Standard 18 Gauge 1/4″ Crown Staples From 1/2″ To 1-1/2″ Length , Die Cast Aluminum Body, Features Specially Hardened Driver Blade, Adjustable Depth Of Drive & Exhaust, Safety Is Located Behind Driver Blade For Easy Visibility, Rubber Nose Does Not Mar Work, Sequential Fire Trigger, Quick Release Nose Piece Requires No Wrenches To Remove Jambs & Top Loading Magazine, Includes 1/4″ Coupler With Cover, Staples, Oil, Wrenches, Manual &...
With its light weight, only 2.9 lbs, the powerful FinishPro 18 is tough enough to do the job but light enough for all-day work. The FinishPro 18 brad nailer drives nails up to 2″ into hard wood applications. FinishPro 18 FEATURES * Extra power — Drives fasteners up to 2″ in hard wood applications * Belt hook — For convenience * Adjustable depth-of-drive * Rear exhaust — Keeps oil and dust away from work surface * Easy-open latch — For quick and comfortable loading...
Everything you need to start your finish woodworking, from the air compressor to the nailers, fasteners, air hose, and fittings. The brad nailer uses 18-gauge, 5/8 to 1-1/4- brad nails. The finish nailer uses 16-gauge, 3/4 to 2-1/2-inch finish nails. The stapler uses 18-gauge, 1/4-inch staples from 1/2 to 1 inch long. Features include adjustable depth-of-drive, jam release mechanism, non-marring nose tip, hardened driver blade and muffled, adjustable exhaust port. The .8 horsepower 6-gallon pancake...
Great for occasional use to have in your vehicle?s trunk for those emergency moments, adapters included for those times at the beach or park to inflate sports equipment. This streamlined, sturdy air compressor is perfect for cars and other standard-sized vehicles and is designed for day-to-day use, from blowing up balls to inflating low tires. The MF-1040′s powerful 12-volts and 150 PSI capacity is comparable to other higher-priced compressors. 12 volt. 10 ft power cord to reach around the...
With this 2-1/2-inch, 16-gauge finish nailer, Porter-Cable continues to make good on their reputation as one of the top pneumatic toolmakers. The gun’s straight magazine is well thought out, made from aluminum, and top loading. This is a sturdy, compact nailer that shoots a conveniently wide range of 16-gauge nails, from 3/4 to 2-1/2 inches. The nailer has a good balance and a nice, thin grip made of porous rubber. (You don’t have to have the hands of a giant to comfortably operate this...
If installing hardwood floors is in your immediate future, the Porter-Cable FCN200 two-inch flooring cleat nailer is a smart tool to consider. The nailer is designed specifically for installing tongue-and-groove hardwood flooring with L-shaped flooring cleats and a thickness of 1/2 to 25/32 inch. The nailer works on 70-100 psi of compressed air and drives cleats with accuracy and force through even the toughest woods, but without damaging even the most delicate pre-finished floor. A 45 degree angled...
This 2-in-1 tool has everything you need to frame from you sill plates to your roof rafters. The Bostitch N88RH-2MCN accepts 2” – 3-1/2” plastic collated framing nails as well as 1-1/2” – 2-1/2” metal connector nails. That’s right, it’s a 2-in-1 tool! It comes with two different nose pieces that are easily changed for doing both standard framing and metal connector applications. With 1000 inch lbs of power, it is able to tackle the toughest jobsite applications, such as framing or...
This Porter-Cable 18-gauge, 2-inch brad nailer is a compact, comfortable-to-carry unit that might not offer quite as many extras as other (more expensive) units, but it’s very reliable and does its job well. This nailer shoots standard brads from 3/4 to 2 inches long and has an anodized magazine with a reload indicator. The die-cast aluminum body is lightweight but still very strong, and the handle is comfortable to hold, even over long periods of time. The quick-release nosepiece lets you...
This highly portable Bostitch nailer will make your nailing jobs a piece of cake. Whether you’re putting up metal connectors or building a deck, the PN100 is up to the task. It’s powerful enough to drive nails up to 5-inches in length, and is ideal for anyone working in tight spaces. Weighing in at just 2.9 lbs., the PN100 is crafted to help you complete demanding jobs with ease. The magnetic nose has a recessed nail slot to hold nails tightly in place, and the ergonomic design maximizes...
The Contour Lounge Chair by Murillo
Murillo, the Philippines based manufacturer has been involved in manufacturing furniture and...
Contemporary Office Designs from Triple Five Design
Looking for modern interior inspiration for your office, here we got some preview of the contemporary...
The Gallery House designed by architect Richard Librach
Today’s modern house inspiration is coming from Richard Librach Architect, Toronto-based...
Sign up to receive daily email updates of ArchiThings.Com headlines. Enter your email address below: